How To Hang Double Rod Curtains

The system typically includes two brackets and two curtain rods.

How to hang double rod curtains. The curtains are provided with hooks or they have pre stitched loops through which the rods can be passed. Measure up to the height of your curtain panels. Step 3 mount your brackets.

Use your level to lightly draw horizontal lines. From there use a pencil and tape measure to mark curtain bracket placements six inches from the outside edge of the window frame to allow plenty of natural light. Step 4 hang the curtains.

You may use wall anchors or drywall screws first if you are not. The brackets are mount on either side of the window. Double rod curtain are a hanging systems for curtains and drapes that let you hang several layered panels or valances.

Hang the double bracket that is supplied with the double rod on each side of the window at the desired height. When buying curtains keep in mind that their length should cover the entire window unless they are cafe curtains. Position a bracket at the right reference mark and clearly mark on the wall both holes.

Place the rod into the right side bracket and use a level to determine the placement of the left side bracket. Secure them firmly with the nails so that they can withstand the weight of the curtain and the rod. Decide where you want the bottom of your curtain to fall.

If youre not using a double rod you can skip this step. Now you can hang the curtains. Hang the curtains and double check to make sure your brackets are still secure.

Step 2 mark your bracket placement. How to hang double curtain rods place a step ladder next to the window where the curtain rods will be installed. Align the bracket over the center of the 15a mark referenced in step 2 and use a pencil to mark the holes where the screws will go.

Use a screwdriver to. To do so youll need to first install the curtain brackets. Hang the back drape on the curtain rod.

How to install double curtain rods step 1 decide where to put your brackets. Put the main curtain rod in place. Remove the rod and repeat steps 4 7 to secure the left side bracket to the frame.

Hold a carpenters level against the wall between the reference marks to ensure. Insert the back curtain rod if youre using a double rod setup. If you buy tab top curtains make sure the curtain length doesnt include the length of the tabs.

Attach curtain rings if they are part of your setup. Then you can hang your sheer curtain or blackout curtain. If the drape has a casing or rod pocket hang it by running the curtain rod through the casing before you hang the rod on the inside hooks of the brackets.